High Efficient Autoamtic Continuous EPS Block Cutting Machine
High Efficient Autoamtic Continuous EPS Block Cutting Machine
High Efficient Autoamtic Continuous EPS Block Cutting Machine
With automatic wire setting system to set cutting wire automatically for different cutting sizes. Efficiency improved & Energy saving .
- By vibration cutting for horizontal and vertical cutting,the whole work efficiency increase twice over compared with the traditional cutting.
- With correct device & block holding device for each station(vertical,horizontal and cross cutting) improve the cutting high precision.
- With PLC and light sensor control, fully-automatic;
- Working procedure: This is a fully-automatic and continuous cutting line which can process 5 blocks together at the same time.
- It uses PLC control, and the blocks will be stopped and transferred automatically by reaching the light sensor.
- The block will be cut horizontally in the first station, then transferred to the next station for vertical cutting, then transferred to cross cutting station. The end is products collecting
- Adopts PLC and touch screen controls, the line achieves fully automatic running without photoelectric sensor switches.
- Material feeding, layering, cutting and cutting off runs at the same time which ensures a high continuity and improves cutting efficiency greatly.
- It needs only 2 to 3 people to operate the whole line.
- Instead of using the principle of cutting plates by heating the electrical wire, vibration cutting speed raised more than one times.
- Equipped with correcting device, working stations have a higher cutting accuracy.
The machine can cutting EPS block with very high efficiency . EPS panel are widely used for external wall building insulation, sanwich panel , etc.
Items |
Unit |
PSC/L2000 |
PSC/L4000 |
PSC/L6000 |
PSC/L6000 |
|
Cutting Block Dimension |
Length |
mm |
2000 |
2000-4120 |
2000-6120 |
2000-8160 |
|
Width |
mm |
1000-1300 |
1000-1300 |
1000-1300 |
1000-1300 |
|
Height |
mm |
500-1260 |
500-1260 |
500-1260 |
500-1260 |
Max.Cutting Thickness |
mm |
10 |
10 |
10 |
10 |
|
Cutting Density |
Kg/m |
4-40 |
4-40 |
4-40 |
4-40 |
|
Cutting Speed |
m/min |
0-5 |
0-5 |
0-5 |
0-5 |
|
Hot Wire Max Setting |
Horizontal |
piece |
50 |
50 |
50 |
50 |
|
Vertical |
piece |
20 |
20 |
20 |
20 |
|
Cross Cutting |
piece |
20 |
20 |
20 |
20 |
Material and Diameter of Hot wire diameter |
mm |
0.4, G20Ni80 |
||||
Voltage |
V |
380V,50Hz(alternated) |
||||
Total Installation Power |
KW |
36.4-38.4 |
||||
Transformer Power |
KW |
30 |
||||
Machine Weight |
kg |
3500-4000(customized) |
||||
Our factory can produce machine as buyer’s demand |
- Based on auto wire adjustment, layered cutting saves time and labor by adjusting machine automatically when cutting different thicknesses.
- Cutting density range: 4-40kg / m³
- Cutting speed: 0-3 m / min